Sep 072016

TeamViewer on Linux logoI’m not exactly a big fan of TeamViewer, since you’ll never know what’s going to happen with that traffic of yours, so I prefer VNC over SSH instead. A few weeks ago I got TeamViewer access to a remote workstation machine for the purpose of processing A/V files however. Basically, it was about video and audio transcoding on said machine.

Since the stream meta data (like the language of an audio stream) wasn’t always there, I wanted to check it by playing back the files remotely in foobar2000 or MPC-HC. TeamViewer does offer a feature to relay the audio from a remote machine to your local box, as long as the remote server has some kind of soundcard / sound chip installed. I was using TeamViewer 11 – the newest version at the time of writing – to connect from CentOS 6.8 Linux to a Windows 7 Professional machine. Playing back audio yielded nothing but silence though.

Now, TeamViewer is actually not native Linux software. Both its Linux and MacOS X versions come with a bundled Wine 1.6 distribution preconfigured to run the 32-bit TeamViewer Windows binary. It was thus logical to assume that the configuration of TeamViewers’ built-in Wine was broken. This may happen in cases where you upgrade TeamViewer from previous releases (which is what I had done, 7 -> 8 -> 9 -> 11).

There are a multitude of proposed solutions to fix this, and since none of them worked for me as-is, I’d like to add my own to the mix. The first useful hint came from [here]. You absolutely need a working system-wide Wine setup for this. I already had one that I needed for work anyway, namely Wine 1.8.6 from the [EPEL] repository, configured using [winetricks]. We’re going to take some files from that installation and essentially replace TeamViewers’ own Wine with the one distributed by EPEL.

So I had TeamViewer 11 installed in /opt/teamviewer/ and some important configuration files for it in ~/.local/share/teamviewer11/ and ~/.config/teamviewer/. First, we backup the wine files of TeamViewer and replace them with the platform ones (the paths may vary depending on your Linux distribution, but the file names should not):

# mv /opt/teamviewer/tv_bin/wine/bin/wine /opt/teamviewer/tv_bin/wine/bin/wine.BACKUP
# mv /opt/teamviewer/tv_bin/wine/bin/wineserver /opt/teamviewer/tv_bin/wine/bin/wineserver.BACKUP
# mv /opt/teamviewer/tv_bin/wine/bin/wine-preloader /opt/teamviewer/tv_bin/wine/bin/wine-preloader.BACKUP
# mv /opt/teamviewer/tv_bin/wine/lib/ /opt/teamviewer/tv_bin/wine/lib/
# mv /opt/teamviewer/tv_bin/wine/lib/wine/ /opt/teamviewer/tv_bin/wine/lib/wine.BACKUP/
# cp /usr/bin/wine /usr/bin/wineserver /usr/bin/wine-preloader /opt/teamviewer/tv_bin/wine/bin/
# cp /usr/lib/ /opt/teamviewer/tv_bin/wine/lib/
# cp -r /usr/lib/wine/ /opt/teamviewer/tv_bin/wine/lib/

This will replace all the binaries and libraries, in my case shoving Wine 1.8.6 underneath TeamViewer. This isn’t all that’s needed however. We’ll also need the system registry hive of your working Wine installation (with sound). That should be stored in ~/.wine/system.reg! Let’s replace TeamViewers’ own hive with this one:

$ mv ~/.local/share/teamviewer11/system.reg ~/.local/share/teamviewer11/system.reg.BACKUP
$ cp ~/.wine/system.reg ~/.local/share/teamviewer11/

Ok, and the final part is adding the proper Linux audio backend to this Wines’ configuration. That part is stored in ~/.wine/user.reg. Replacing the whole file didn’t work for me though, as TeamViewer would crash upon launch, probably missing some keys from its own user.reg. So, let’s just edit its file instead, open ~/.local/share/teamviewer11/system.reg with your favorite text editor and add the following line in a proper location (it’s sorted alphabetically):

[Software\\Wine\\Drivers\\winepulse.drv] 1473239241

The corresponding file should be found within TeamViewers’ replaced Wine distribution now by the way, in my case it’s /opt/teamviewer/tv_bin/wine/lib/wine/fakedlls/winepulse.drv.

Now, run the TeamViewer profile updater (Some people say it’s required to make this work, it wasn’t for me, but it didn’t hurt either): $ /opt/teamviewer/tv_bin/TeamViewer --update-profile and then its’ Wine configuration: $ /opt/teamviewer/tv_bin/TeamViewer --winecfg. After that, you should be greeted with this:

TeamViewer 11 running its own winecfg

TeamViewer 11 running its own copy of winecfg.

Before the modifications, the configuration window would show “None” as the driver, without any way to change it. So no audio, whereas we have Pulseaudio now. Press “Test Sound” if you want to check whether it truly works. I haven’t tested the ALSA backend by the way. In my case, as soon as the registry was fixed, Wine just autoselected Pulseaudio, which is fine for me.

Now launch TeamViewer and check out the audio options in this submenu:

TeamViewer preferences

The TeamViewer 11 preferences can be found here.

It should look like this:

TeamViewers audio options

Make sure “Play computer sounds and music” is checked! (click to enlarge)

Now, after having connected and logged in, you may also wish to verify the conference audio settings in TeamViewers’ top menu:

TeamViewer 11 conference audio settings

TeamViewer 11 conference audio settings, make sure “Computer sound” is checked!

When you play a sound file on the remote computer, you should hear it on your local one as well. With that, I can finally test the audio files I’m supposed to use on that remote machine for their actual language (which is a rather important detail) where meta data isn’t available.

This seems to be a problem of TeamViewers installation / update procedure which hasn’t been addressed for several major released now. I presume just removing all traces of TeamViewer and installing it from scratch might also do the trick, but I didn’t try it for myself.

Ah, and one more thing: If you can’t launch TeamViewer on CentOS 6.x because you’re getting the following error…

teamviewerd error

TeamViewer Daemon not running…

…forget about the solutions on the web on top of what this message is telling you. TeamViewer 11 uses a systemd-style script for launching its daemon on Linux now, and that won’t do on SysV init systems. Just become root and launch the crap manually: # /opt/teamviewer/tv_bin/teamviewerd &, then press <CTRL>+<d> and it works!

Let’s hope that daemon isn’t doing anything evil while running as root. :roll:

CC BY-NC-SA 4.0 Teamviewer 11 on Linux and no remote sound? by The GAT at is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> <pre lang="" line="" escaped="" cssfile="">