This is just a minor update after [part 2], but anyway. My old workstation (the one I’m migrating away from) just broke down a few days ago, so I had to do something, and quickly. Since I still don’t have any disks for my new RAID-6, I had to pull the existing RAID array from my old box and attach it to my new workstation in a hurry. It does look quite ugly too, with the RAID lying around on the table beside an open Lian Li PC-A79B. This is not how it was supposed to be, but well… In the meantime I found out that it was my Tagan Piperock 1300W power supply which broke down (Built by Topower by the way). Sad, because I liked it for its sturdy metal screw-on modular plugs, but well. So the machine now sits in its final location, it just doesn’t look too good at the moment:
In any case, I wanted to play around with that new Corsair “Professional Series Platinum AX1200i” of mine, which is a fully digital power supply unit featuring an I²C port. With that, you can hook it up to Corsairs Link [Commander], or you can use the dongle provided with the unit and hook it up to an internal USB header on your mainboard. Here’s a crop of a photo previously shown, this is the dongle:
Now what this actually is, is a [Silicon Labs] – or Silabs in short – I²C to [USBXPress] bridge chip. So it’s not using the same USB HID device class of the Link Commander, but a completely different protocol, which is also why we’re tied to using the Corsair Link software. The free software project [CorsairLinkPlusPlus] won’t work with it at all as it supports only the Link Commander itself.
Having said that, I can’t use the Corsair Link software – which uses .Net 4.5 – on XP x64, it just won’t work on the old OS. The drivers that come with the device though are from Silabs and DO support XP and XP x64. The USB vendor ID was changed from Silabs to Corsair though, so it’s not
1B1C:1C00, making it impossible to install original Silabs drivers. But that’s ok, what Corsair’s shipping with the power supply works just as well.
You may not wish to install the whole Corsair Link software on XP just to get the drivers though. So I have isolated the drivers from the package for you to install them separately. The Hydro water cooler driver is also provided, but you don’t need it if it’s just for a power supply like in my case:
- [Corsair Link / Silabs USBXpress dongle driver] for XP/XP x64.
- [Corsair Link /Silabs hydro series driver] for XP/XP x64.
But, while you can install the dongle, you can’t talk to it, lacking the userland software for that. Now when I said “how to run Corsair Link on XP x64” in the title, I have to admit I was lying a bit. Because what I did was to virtualize the dongle using Oracle VirtualBox 4.2.26 and then run the Corsair Link software on a Windows 7 x64 virtual machine. Now, before launching that, the XP x64 host systems device manager will show this:
Just so it’s handled automatically for every boot of my Windows 7 VM, I created a USB device filter in the virtual machines’ settings:
Now when you start up the VM, VirtualBox will grab the device and replace it with a device called “VirtualBox USB”, thus making it unavailable on the host machine. Just install Corsair Link in the VM, and everything will work nicely:
Many have described the software as buggy and crappy, but for me it gets the job done. All I wanted was to change the behavior of the unit, disabling its passive mode at low loads. While a nice feature, the internal thermal probe reports temperatures of up to 60°C at 300W load with the fan sitting still, and I don’t quite like that. I don’t see why it is needed to artificially accelerate the aging process of the PSUs electrolytic capacitors like that, so I set the fan speed to 40%, resulting in slightly short of 800rpm. Very silent, and good enough even for high loads. I now get down to 28-35°C depending on ambient temperatures without perceiving any additional noise. It may reach 40°C on really hot days I guess, but that’s a lot better than 60°C.
Just sad that we can’t define a complete custom fan curve for this unit, based on load or temperature readings. It’s possible with system fans when working with the Link Commander, but not for this one.
Naturally, virtualization also works if you’re on Linux or BSD UNIX or Solaris or whatever. It’s cumbersome, yes, but if you need it only to tell the PSUs firmware to keep the fan spinning, it’s ok. You don’t need to keep the software running, that’s the sweet part. The settings will be stored in the power supplys’ firmware directly.
Only downside is: You need a Windows Vista/7 or newer license for that of course. But maybe we’ll see some free software in the future, people are working on it, that much’s for sure!
Now let’s hope part 4 of this log will be my new hard disks, because I’m really starting to run low on disk space already…
Edit: Part 4 should now be ready, because my new 6TB SAS drives are here. However, instead it turned out to be quite the disaster, which is why [it’s part 3½ instead]. There are some preliminary benchmarks for you to see however, at least something.