Jan 262016

HakuNeko logoSince I’ve started using FreeBSD as a Linux and Windows replacement, I’ve naturally always been looking at porting my “known good” software over to the UNIX OS, or at replacing it by something that gets the job done without getting on my nerves too much at the same time. For most parts other than TrueCrypt, that was quite achievable, even though I had to endure varying degrees of pain getting there. Now, my favorite Manga / Comic ripper on Windows, [HakuNeko] was the next piece of software on the list. It’s basically just a more advanced Manga website parser and downloader based on stuff like [cURL], [OpenSSL] or the [wxWidgets] GUI libraries.

I didn’t even know this until recently (shame on me for never looking closely), but HakuNeko is actually free software licensed under the MIT license. Unfortunately, the source code and build system are quite Linux- and Windows-centric, and there exist neither packages nor ports of it for FreeBSD UNIX. Actually, the code doesn’t even build on my CentOS 6.7 Linux right now (I have yet to figure out the exact problem), but I managed to fix it up so it can compile and work on FreeBSD! And here’s how, step by step:

1.) Prerequisites

Please note that from here on, terminal commands are shown in this form: $ command or # command. Commands starting with a $ are to be executed as a regular user, and those starting with # have to be executed as the superuser root.

Ok, this has been done on FreeBSD 10.2 x86_32 using HakuNeko 1.3.12, both are current at the time of writing. I guess it might work on older and future releases of FreeBSD with different releases of HakuNeko as well, but hey, who knows?! That having been said, you’ll need the following software on top of FreeBSD for the build system to work (I may have missed something here, if so, just install the missing stuff like shown below):

  • cURL
  • GNU sed
  • GNU find
  • bash
  • OpenSSL
  • wxWidgets 2.8.x

Stuff that’s not on your machine can be fetched and installed as root from the official package repository, Like e.g.: # pkg install gsed findutils bash wx28-gtk2 wx28-gtk2-common wx28-gtk2-contrib wx28-gtk2-contrib-common

Of course you’ll need the HakuNeko source code as well. You can get it from official sources (see the link in first paragraph) or download it directly from here in the version that I’ve used successfully. If you take my version, you need 7zip for FreeBSD as well: # pkg install p7zip.

Unpack it:

  • $ 7z x hakuneko_1.3.12_src.7z (My version)
  • $ tar -xzvf hakuneko_1.3.12_src.tar.gz (Official version)

The insides of my archive are just vanilla as well however, so you’ll still need to do all the modifications by yourself.

2.) Replace the shebang lines in all scripts which require it

Enter the unpacked source directory of HakuNeko and open the following scripts in your favorite text editor, then replace the leading shebang lines #!/bin/bash with #!/usr/local/bin/bash:

  • ./configure
  • ./config_clang.sh
  • ./config_default.sh
  • ./res/parsers/kissanime.sh

It’s always the first line in each of those scripts, see config_clang.sh for example:

  1. #!/bin/bash
  3. # import setings from config-default
  4. . ./config_default.sh
  6. # overwrite settings from config-default
  8. CC="clang++"
  9. LD="clang++"

This would have to turn into the following (I also fixed that comment typo while I was at it):

  1. #!/usr/local/bin/bash
  3. # import settings from config-default
  4. . ./config_default.sh
  6. # overwrite settings from config-default
  8. CC="clang++"
  9. LD="clang++"

3.) Replace all sed invocations with gsed invocations in all scripts which call sed

This is needed because FreeBSDs sed and Linux’ GNU sed aren’t exactly that compatible in how they’re being called, different options and all.

In the text editor vi, the expression :%s/sed /gsed /g can do this globally over an entire file (mind the whitespaces, don’t omit them!). Or just use a convenient graphical text editor like gedit or leafpad for searching and replacing all occasions. The following files need sed replaced with gsed:

  • ./configure
  • ./res/parsers/kissanime.sh

4.) Replace all find invocations with gfind invocations in ./configure

Same situation as above with GNU find, like :%s/find /gfind /g or so, but only in one file:

  • ./configure

5.) Fix the make check

This is rather cosmetic in nature as $ ./configure won’t die if this test fails, but you may still wish to fix this. Just replace the string make --version with gmake --version (there is only one occurrence) in:

  • ./configure

6.) Fix the DIST variables’ content

I don’t think that this is really necessary either, but while we’re at it… Change the DIST=linux default to DIST=FreeBSD in:

  • ./configure

Again, only one occurrence.

7.) Run ./configure to create the Makefile

Enough with that, let’s run the first part of the build tools:

  • $ ./configure --config-clang

Notice the --config-clang option? We could use GCC as well, but since clang is FreeBSDs new and default platform compiler, you should stick with that whenever feasible. It works for HakuNeko, so we’re gonna use the default compiler, which means you don’t need to install the entire GCC for just this.

There will be error messages looking quite intimidating, like the basic linker test failing, but you can safely ignore those. Has something to do with different function name prefixes in FreeBSDs libc (or whatever, I don’t really get it), but it doesn’t matter.

However, there is one detail that the script will get wrong, and that’s a part of our include path. So let’s handle that:

8.) Fix the includes in the CFLAGS in the Makefile

Find the line containing the string CFLAGS = -c -Wall -O2 -I/usr/lib64/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread or similar in the newly created ./Makefile. After the option -O2 add the following: -I/usr/local/include. So it looks like this: CFLAGS = -c -Wall -O2 -I/usr/local/include -I/usr/lib64/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread. That’s it for the Makefile.

9.) Fix the Linux-specific conditionals across the C++ source code

And now the real work starts, because we need to fix up portions of the C++ code itself as well. While the code would build and run fine on FreeBSD, those relevant parts are hidden behind some C++ preprocessor macros/conditionals looking for Linux instead. Thus, important parts of the code can’t even compile on FreeBSD, because the code only knows Linux and Windows. Fixing that isn’t extremely hard though, just a bit of copy, paste and/or modify. First of all, the following files need to be fixed:

  • ./src/MangaConnector.cpp
  • ./src/Logger.cpp
  • ./src/MangaDownloaderMain.cpp
  • ./src/MangaDownloaderConfiguration.cpp

Now, what you should look for are all conditional blocks which look like #ifdef __LINUX__. Each will end with an #endif line. Naturally, there are also #ifdef __WINDOWS__ blocks, but those don’t concern us, as we’re going to use the “Linux-specific” code, if you can call it that. Let me give you an example right out of MangaConnector.cpp, starting at line #20:

  1. #ifdef __LINUX__
  2. wxString MCEntry::invalidFileCharacters = wxT("/\r\n\t");
  3. #endif

Now given that the Linux code builds just fine on FreeBSD, the most elegant and easier version would be to just alter all those #ifdef conditionals to inclusive #if defined ORs, so that they trigger for both Linux and FreeBSD. If you do this, the block from above would need to change to this:

  1. #if defined __LINUX__ || __FreeBSD__
  2. wxString MCEntry::invalidFileCharacters = wxT("/\r\n\t");
  3. #endif

Should you ever want to create different code paths for Linux and FreeBSD, you can also just duplicate it. That way you could later make changes for just Linux or just FreeBSD separately:

  1. #ifdef __LINUX__
  2. wxString MCEntry::invalidFileCharacters = wxT("/\r\n\t");
  3. #endif
  4. #ifdef __FreeBSD__
  5. wxString MCEntry::invalidFileCharacters = wxT("/\r\n\t");
  6. #endif

Whichever way you choose, you’ll need to find and update every single one of those conditional blocks. There are three in Logger.cpp, three in MangaConnector.cpp, two in MangaDownloaderConfiguration.cpp and again three in MangaDownloaderMain.cpp. Some are more than 10 lines long, so make sure to not make any mistakes if duplicating them.

Note that you can maybe extend compatibility even further with additional directives like __OpenBSD__ or __NetBSD__ for additional BSDs or __unix__ for a wide range of UNIX systems like AIX or HP-UX. None of which has been tested by me of course.

When all of that is done, it’s compile and install time:

10.) Compile and install

You can compile as a regular user, but the installation needs root by default. I’ll assume you’ll want to install HakuNeko system-wide, so, we’ll leave the installation target directories on their defaults below /usr/local/. While sitting in the unpacked source directory, run:

  • $ gmake
  • # gmake install

If nothing starts to crash and burn, this should compile and install the code. clang will show some warnings during compilation, but you can safely ignore that.

11.) Start up the white kitty

The installation procedure will also conveniently update your window manager as well, if you’re using panels/menus. Here it’s Xfce4:

HakuNeko is showing up as an "Internet" tool

HakuNeko (“White Cat”) is showing up as an “Internet” tool. Makes sense.

With the modifications done properly it should fire up just fine after initializing its Manga connectors:

HakuNeko with the awesomeness that is "Gakkou Gurashi!" being selected from the HTTP source "MangaReader"

HakuNeko with the awesomeness that is “Gakkou Gurashi!” being selected from the HTTP source [MangaReader].

Recently the developers have also added [DynastyScans] as a source, which provides access to partially “rather juicy” Yuri Dōjinshi (self-published amateur and sometimes semi-professional works) of well-known Manga/Anime, if you’re into that. Yuri, that is (“girls love”). Mind you, not all, but a lot of the stuff on DynastyScans can be considered NSFW and likely 18+, just as a word of warning:

HakuNeko fetching a Yuru Yuri Dōjinshi from DynastyScans, bypassing their download limits by not fetching packaged ZIPs - it works perfectly!

HakuNeko fetching a Yuru Yuri Dōjinshi called “Secret Flowers” from DynastyScans, bypassing their download limits by not fetching packaged ZIPs – it works perfectly!

Together with a good comic book reader that can read both plain JPEG-filled folders and stuff like packaged .cbz files, HakuNeko makes FreeBSD a capable comic book / Manga reading system. My personal choice for a reader to accompany HakuNeko would be [QComicBook], which you can easily get on FreeBSD. There are others you can fetch from the official package repository as well though.

Final result:

HakuNeko and QComicBook make a good team on FreeBSD UNIX

HakuNeko and QComicBook make a good team on FreeBSD UNIX – I like the reader even more than ComicRack on Windows.

And, at the very end, one more thing, even though you’re likely going to be aware of this already: Just like Anime fansubs, fan-translated Manga or even Dōjinshi are sitting in a legal grey zone, as long as the book in question hasn’t been licensed in your country. It’s being tolerated, but if it does get licensed, ownership of a fan-translated version will likely become illegal, which means you should actually buy the stuff at that point in time.

Just wanted to have that said as well.

Should you have trouble building HakuNeko on FreeBSD 10 UNIX (maybe because I missed something), please let me know in the comments!